wooden furniture, wooden living room furniture, wooden bedroom furniture, wooden dining furniture

* Zero defect
* Do it right the first time
* Quality management system: ISO 9001:2008

In House Lab Tests
1. Packing test: Drop Test, Vibration Test, Incline Impact Test
Purpose: To test the shock proof of a packaged product
Test Method:
1.1 ISTA 1A (Package weight 150 lbs. or less)
10 drops- 6 faces, 3-extension edge and 1 corner

Package Weight		Drop Height
Equal to or greater than	But less than	Free Fall
0 lbs	21 lbs	30 in
21 lbs	41 lbs	24 in
41 lbs	61 lbs	18 in
61 lbs	100 lbs	12 in
100 lbs	150 lbs	8 in

Vibration cycle: 14,200
1.2 ISTA 1B (Package weight over 150 lbs.)
6 drops – 6 faces
Drop Height: 6 in
or incline impact at 69 in (1.7m) per second impact velocity
Vibration cycle: 11,800

Drop Test		Vibration Test		Incline Impact test

2. Coating Test: Adhesion Test, Printing Test, Cycle Test
Purpose: To test the durability of painting on a product
Test method: Shown as pictures
2.1 Adhesion Test: Cut the finish to 2mm square by a cross cut tester, place tape onto the cut area and press and peel off the tape.

Adhesion Test 1		Adhesion Test 2

2.2 Printing Test: Place a 2 lbs per square inch weight on a cheese cloth lying on the sample for no less than 4 hours.

Printing Test		Printing Test

2.3 Cycle Test: Hot and cold cycle, 10 cycles

Sequence	Time	Temperature
1	60minutes	50℃
2	30minutes	25℃
3	60minutes	-20℃
4	30minutes	25℃

Circle Test

3. Chair Standard Test: Seat Drop Impact Test, Rocking test:
Purpose: To test the construction of chairs
Test Method: Seat drop impact for 10 times with weight of 200 lbs, rocking for 10000 times



4. Table Standard Test:
4.1 Leg Strength Test, loading weight of 75 lbs for 1 minute
4.2 Distribution Loading Capacity Test, loading weight of 40 lbs per square inch for 30 minutes
4.3 Concentration Loading Capacity Test, loading weight of 300 lbs on a 12 inch diameter disk, 6 inch to the end for 5 minutes
4.4 Stability Test, loading weight of 100 lbs on a 12 inch diameter disk, 1 inch to the end for 1 minute
Purpose: To test the construction of tables
Test method: Shown as pictures
Distribution Loading Capacity Test

Table Distribution Loading Capacity Testn Test		Table Concentration Loading Capacity Test		Table Stability Test

5. Drawer & Door Tipping/Loading Test: Door Tipping Test, Drawer Tipping Test, Door Loading Test, Drawer Loading Test
Purpose: To test the construction of cabinet with drawers and doors
Test method: Loading weight of 50 lbs to the drawer/door for 1 minute as shown in the picture.

Draw Loading Test

6. EMC Test:
Purpose: To test the EMC of a product
Test method:
·EMC is 4.3%.
·Temperature: 38℃= 100℉
·Relative Humidity: 18%
·Test Time: 10 days

EMC Test

7. Hardware and Metal Test: Salt Spray Test:
Purpose: To test the rust proof of hardware or metal parts
Test method:
Brass parts: Salt fog with NaOH liquid of 1%, test time of 48 hours
Metal parts: Salt fog with NaCl liquid of 5%, test time of 12 to 16 hours

Salt Spray Test